ABSTRACT
<p><b>OBJECTIVE</b>To study the biomechanical mechanism of head injuries beaten with sticks, which is common in the battery or assaultive cases.</p><p><b>METHODS</b>In this study, the Hybrid-III anthropomorphic test device and finite element model (FEM) of the total human model for safety (THUMS) head were used to determine the biomechanical response of head while being beaten with different sticks. Total eight Hybrid-III tests and four finite element simulations were conducted. The contact force, resultant acceleration of head center of gravity, intracranial pressure and von Mises stress were calculated to determine the different biomechanical behavior of head with beaten by different sticks.</p><p><b>RESULTS</b>In Hybrid-III tests, the stick in each group demonstrated the similar kinematic behavior under the same loading condition. The peak values of the resultant acceleration for thick iron stick group, thin iron stick group, thick wooden stick group and thin wooden stick group were 203.4 g, 221.1 g, 170.5 g and 122.2 g respectively. In finite element simulations, positive intracranial pressure was initially observed in the frontal comparing with negative intracranial pressure in the contra-coup site. Subsequently the intracranial pressure in the coup site was decreasing toward negative value while the contra-coup intracranial pressure increasing toward positive values.</p><p><b>CONCLUSIONS</b>The results illustrated that the stiffer and larger the stick was, the higher the von Mises stress, contact force and intracranial pressure were. We believed that the results in the Hybrid-III tests and THUMS head simulations for brain injury beaten with sticks could be reliable and useful for better understanding the injury mechanism.</p>
Subject(s)
Humans , Biomechanical Phenomena , Brain Injuries , Finite Element Analysis , Intracranial Pressure , ManikinsABSTRACT
Purpose: Set up a new technique to reproduce the cavitation effect in the process of brain deceleration impact Methods: A transparent physical brain model with tiny air bubbles was built and loaded on an upright brain deceleration impacting moveable platform. Then, in the high strength lighting circumstance, the moveable platform was made to free fall from a height of 40cm and impacted on a fixed platform, and the whole deceleration impacting process was recorded by a high-speed video camera. Using the serial pictures analysing software, the volume and mean pressure change of the air bubbles were calculated and the cavitation effect of the brain tissue during the impact was studied. Results: The volume of the air bubble in the contrecoup site increased obviously in the impacting process, the volume of the air bubble in the coup site decreased in the impacting process and the volume change of the air bubble in the middle site was not evident enough in the impacting process. Conclusion: The results proved the negative pressure and the cavitation phenomenon in the contrecoup site. The experiments explicitly and directly showed the cavitation effect in the contrecoup site during the decelerating impact It was helpful to better understand the distribution characters of the dynamic stress of the brain tissue in the brain decelerating impact in a certain extent, and it could also provide some methods and experimental foundation to clarify the mechanical mechanism of the brain contrecoup injury which was often taken place in traffic accidental injury. Besides, the methods were of significance to research the biomechanism, diagnosis and prevention of the brain deceleration impacting injury.
ABSTRACT
Objective to research the mechanical style(compressive or tensile force)of the key site of brain tissue in brain deceleration impact.Method a transparent physical brain model with air bubbles was built and loaded on an upright brain decaler ation impacting expedmentel platform.Then,the moveable platform was made a free fall from a height of 400mm and impacted on the fixed platform,and the whole deceleration impacting process was recorded by a high-speed video camera.Using the serial pictures analyzing Software,the length change of the long ads(vertical to the impacting direction)and the short axis(in the impacting di-rection)of the air bubbles were analyzed and calculated.Result the length change of the long axis of air bub-ble with in site coup was smallerthan the absolute value of that of the short axis;while with the air bubble in the contrecoup site,the length change of the long axis was bigger than the absolute value of the short axis.Conclusions the results showed that the air bubble in the coup site mainly suffered from the tensile force vertical to the impacting direction and the air bubble in the contrecoup site mainly suffered from the compres-sive force in the impacting direction.Since the propeny of tensile resistance of the brain tissue is inferior to the property of compressive resistance of the brain tissue, the injury is often easier to occur in the contrecoup site than in coup site. The results were of significance to the research of biomechanical mechanism, diagnosis and prevention of the brain deceleration impacting injury.